7 Ports Powered USB 3.0 Hub
- A meticulous USB hub with the charging function.
- New design with aluminum enclosure, stylish and elegant.
- With USB3.0 SuperSpeed data transfer, transfer rate up to 5Gbps. Compatible with USB2.0/1.1.
- With BC1.2 charging technology, applicable for all smartphones and tablets.
- Plug and play, no driver installation needed.
- Product Dimension: 157mm x 30mm x 21mm
- Upstream: 1 x USB3.0 USB-A (Male)
- Downstream: 7 x USB3.0 USB-A (Female)
- Power: 5V2A
- DC Dimension: 3.5mm x 1.35mm
- 1 x USB3.0 7-Port Aluminium Hub
- 1 x Power Adaptor
Shipping cost will be calculated during checkout. International duties & taxes may apply and are not calculated at checkout.
Supports data transfer speeds up to 5Gbps, 10X faster than USB 2.0, which allows you to transfer HD movies or files in seconds. Backward compatible with USB2.0/1.1.
This powered usb hub can be powered via the DC 5V Power jack (optional), stablizing the performance of high-consumption USB peripherals.
Premium aluminum alloy housing for better heat dissipation, reinforced material also gives this hub incredible durability.
A LED indicator on the USB hub helps visulaize the connection status.
Go through the following:
1. Press the Windows Key plus R, type "devmgmt.msc", and press Enter.
2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a USB controller card would be under Universal Serial Bus controllers.
3. Your USB device is listed according to the name of the chipset or the dedicated name.
Go through the following:
1. Click the Apple icon.
2. Click About This Mac.
3. Click More Info or System Report.
4. Under the appropriate heading, please check that your USB device is listed (according to the name of the chipset or the dedicated name) and that there isn't an error. For example, a network card would be under Ethernet Cards.
5. You may have to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
If you disconnect a power input from the multiport USB hub during the transmission of the files to or from an attached storage device, it will stop the transmission and may cause file corruption. It is also possible that there will be a loss of function if the power input is removed from the USB hub while it is in operation.
It is important to always follow the disconnection steps listed following:
1. Complete all data transfers over USB to and from the attached storage device.
2. Disconnect the USB hub from the host computer.
3. Disconnect your power input from the USB hub.
4. Eject your attached storage device.