SyncStation Marshmallow M.2 USB-C-PCIe/NVMe M.2 SSD 듀얼 베이 도킹 스테이션(오프라인 복제 포함)
- USB3.2 Gen2 10Gbps 슈퍼스피드
- PCIe/NVMe M.2 SSD용 듀얼 베이
- UASP 및 TRIM 지원
- 내장 냉각 팬 및 먼지 덮개
- 다양한 크기의 M.2 SSD(42/60/80mm)를 지원합니다.
- PCIe Gen4/Gen3 및 기타 모든 NVMe M.2 SSD가 적용 가능합니다.
- USB3.2 Gen2 사양으로 최대 10Gbps의 데이터 전송 속도. USB3.2 Gen1/ 2.0/ 1.1과 하위 호환. SSD TRIM 명령 및 UASP 가속을 지원합니다.
- PC 없이 디스크 A에서 B로 복제하는 오프라인 복제 기능.
- 냉각팬이 내장되어 있어 효율적인 방열이 가능합니다.
- 더스트 커버로 먼지의 영향을 최소화합니다.
- 플러그 앤 플레이. 도구가 필요 없는 설치.
비고: 이 제품에는 M.2 SSD가 포함되어 있지 않으며 고객의 M.2 SSD는 단독 구매가 필요합니다.
하드웨어 및 크기:
- 치수: 93mm x 93mm x 132mm
- DC 크기: 5.5*2.5mm
- 업스트림: USB-C 암
- 다운스트림: PCIe NVMe M.2 SSD(42mm/60mm/80mm)
- 색상: 화이트
- 재료: ABS 하우징
1 x SyncStation Marshmallow M.2
1 x USB-C to USB-C 케이블, 1M(USB3.2 Gen2)
1 x 12V/2A 전원 어댑터
1 x 사용자 설명서
- Support multi-size M.2 SSD (42/60/80mm).
- PCIe Gen4/ Gen3 and all other NVMe M.2 SSD are applicable.
- With USB3.2 Gen2 specification, the data transfer rate up to 10Gbps. Backward compatible with USB3.2 Gen1/ 2.0/ 1.1. Support SSD TRIM command and UASP acceleration.
- Offline clone function for cloning from Disk A to B without PC.
- With a built-in cooling fan for efficient heat dissipation.
- With dust cover to minimize the impact of dust.
- Plug and play. Tool-free installation.
Remark: This product doesn't include any M.2 SSD and customers' M.2 SSDs require solo purchase.
- Dimension: 93mm x 93mm x 132mm
- DC Size: 5.5*2.5mm
- Upstream: USB-C Female
- Downstream: PCIe NVMe M.2 SSD (42mm/60mm/80mm)
- Color: White
- Materials: ABS Housing
1 x SyncStation Marshmallow M.2
1 x USB-C to USB-C Cable in 1M (USB3.2 Gen2)
1 x 12V/2A Power Adapter
Shipping cost will be calculated during checkout. International duties & taxes may apply and are not calculated at checkout.
The drive may be damaged. Test with a known-working drive, or test the drive directly to a PC.
The operating system on the computer may not support reading and writing to the file system on the docked hard drive or SSD. Remember, Windows cannot read Mac or Linux file systems. Also, macOS can read but not write to NTFS drives.
If the drives came from a RAID (Redundant Array of Independent Disks), they would not be accessible in our docking stations.
If the drive uses 4Kn sectors, check the technical specifications of the docking station, and ensure it can read 4Kn drives.
You do not need to format your target hard drive before you begin to duplicate it, because the target hard drive is automatically overwritten during the duplication process.
You can use this device to duplicate an internal hard drive with the stand alone duplicator function if you remove the hard drive from the computer and connect it directly to this device.
To confirm that Windows detects your USB device, complete the following:
Press the Windows key+R, type devmgmt.msc, and press Enter.
In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a USB controller card would be under Universal Serial Bus controllers.
Your USB device is listed according to the name of the chipset.
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).
Initialize a drive
Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.
Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.
Navigate to Disk Management.
When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.
Create a partition in a drive
Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.
Right-click Unallocated or RAW volume, and select New Simple Volume.
In the New Partition Wizard, click Next.
Select Primary partition.
Leave the partition size set to default, and click Next.
Assign a drive letter or leave it set to the default, and click Next.
Enter the following settings to format the partition:
In the File System field, enter NTFS.
Set the Allocation unit size to Default.
In the Volume label field, enter <your name/reference>.
Select the Perform a quick format check box.
Clear the Enable file and folder compression check box.
Click Next > Finish.
The new drive should appear in Windows Explorer.
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).
Initialize a drive
Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.
Create a partition on a drive
Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.
To create a partition on a new drive, complete the following:
Navigate to Applications and click Utilities.
Open Disk Utility.
Select the new drive and click the Partition tab.
Click Options and verify that it is set to GUID Partition Table.
Enter a name for the partition.
The drive should now be accessible in Finder.