PS5용 SolidForce PCIe/NVMe M.2 SSD 10Gbps 인클로저
- PS5 스토리지 확장용
- PS4 게임을 복사하여 PS5에서 직접 플레이
- 콘솔 장착 디자인
- USB 3.2 Gen2 10Gbps 데이터
이 10Gbps 알루미늄 인클로저는 PS5에서 실행하기 위해 게임을 다운로드하고 복사하는 데 사용할 수 있는 PS5용 외부 M.2 SSD 스토리지를 지원합니다. 콘솔 장착 디자인은 견고한 연결을 제공합니다.
• This SolidForce is an excellent solution for your PlayStation 5/4. Especially PS5 to store the games and files, and which from support PS4 as well.
• The M.2 SSD using for PS5 should be PCIe Gen4 x4 interface with 250GB – 4TB capacity.
• Support multi-size PCIe/NVMe M.2 SSD specifications (42mm/60mm/80mm; M Key and M+B Key).
• Support SSD TRIM instruction and UASP acceleration.
• With USB3.2 Gen2 specification over the dual USB-A connectors, data transfer rate up to 10Gbps. Backward compatible with USB3.0/ 2.0/ 1.1.
• With an 10Gbps-supported extension cable for connecting with PS4 or another laptop/computer. Please be aware to connect the cable and the connector according to the instructions on the user manual.
• Tool-free design aluminium-alloy surface for quick installation of M.2 SSD and aid heat dissipation.
Note: Not compatible with M.2 SATA drives.
|Dimension||120mm x 45mm x 15.5mm|
|Downstream||• PCIe/NVMe M.2 SSD
|Cable Length of Attached Cable||15cm USB-A to USB-A 10Gbps Extension Cable|
|Packaging Content||1 x SolidForce For PS5
1 x USB-A to USB-A 10Gbps Extension Cable (15cm)
1 x Aluminium Heat Exchanger
1 x Silicone Thermal Pad
1 x Rubber Mount
1 x User Manual
Shipping cost will be calculated during checkout. International duties & taxes may apply and are not calculated at checkout.
M.2 SSD storage can be used to download and copy games for launching them on PS5, as well as media apps. The console-mounted design provides a solid connection, and resolves the clutter of cables.
Please be aware this enclosure DOES NOT support M.2 PCIe AHCI SSD, mSATA SSD.
Not just for gaming consoles but also for laptops. A supported extension cable is provided for connecting to laptops. Perfect for gamers, tech nerds and 4K media designers.
USB3.2 Gen2 10Gbps SuperSpeed meets the high R/W rate of your M.2 SSD for steady and efficient data transfer. Also, this product supports UASP & TRIM for efficiency-boosting.
Quality materials make this product reliable.
No mounting screws for installation.
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).
Initialize a drive
Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.
Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.
Navigate to Disk Management.
When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.
Create a partition in a drive
Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.
Right-click Unallocated or RAW volume, and select New Simple Volume.
In the New Partition Wizard, click Next.
Select Primary partition.
Leave the partition size set to default, and click Next.
Assign a drive letter or leave it set to the default, and click Next.
Enter the following settings to format the partition:
In the File System field, enter NTFS.
Set the Allocation unit size to Default.
In the Volume label field, enter <your name/reference>.
Select the Perform a quick format check box.
Clear the Enable file and folder compression check box.
Click Next > Finish.
The new drive should appear in Windows Explorer.
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).
Initialize a drive
Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.
Create a partition on a drive
Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.
To create a partition on a new drive, complete the following:
Navigate to Applications and click Utilities.
Open Disk Utility.
Select the new drive and click the Partition tab.
Click Options and verify that it is set to GUID Partition Table.
Enter a name for the partition.
The drive should now be accessible in Finder.
The drive may be damaged. Test with a known-working drive, or test the drive directly to a PC.
The operating system on the computer may not support reading and writing to the file system on the docked hard drive or SSD. Remember, Windows cannot read Mac or Linux file systems. Also, macOS can read but not write to NTFS drives.
If the drives came from a RAID (Redundant Array of Independent Disks), they would not be accessible in our docking stations.
If the drive uses 4Kn sectors, check the technical specifications of the docking station, and ensure it can read 4Kn drives.
You do not need to format your target hard drive before you begin to duplicate it, because the target hard drive is automatically overwritten during the duplication process.