SolidForce USB-C to NVMe/SATA M.2 SSD 10Gbps 인클로저 라이트
- USB3.1 Gen2 10Gbps 슈퍼스피드
- PCIe Gen3x2 NVMe M.2 SSD 및 SATA6Gbps AHCI M.2 SSD와 호환
- 콤팩트한 디자인의 알루미늄 하우징, 도구 없이 설치
- UASP 및 TRIM 지원
도구가 필요 없는 이 인클로저는 PCIe/NVMe 및 SATA/AHCI(42mm/60mm/80mm)를 포함한 모든 유형의 M.2 SSD와 호환됩니다. USB-C 인터페이스를 통해 USB3.1 Gen2 사양은 최대 10Gbps 데이터 전송 속도를 지원합니다. UASP 및 TRIM도 지원합니다.
- USB3.1 Gen2 10Gbps 데이터 전송 속도를 지원합니다.
- 42mm/60mm/80mm의 PCIe Gen3x2 NVMe M.2 SSD 또는 SATA6Gbps AHCI M.2 M 키 및 B+M 키 SSD인 2x 8GT/s 고성능 SSD를 사용할 수 있습니다.
- UASP 기능 및 TRIM 명령을 지원합니다.
- 도구가 필요 없는 디자인으로 M.2 SSD를 빠르고 쉽게 설치할 수 있습니다.
- 열 방출을 돕기 위해 돌출된 핀이 있는 매끄러운 검은색 양극 산화 알루미늄 하우징.
- 케이스 상태를 나타내는 활성 LED 다이오드. (표시등: 연결됨, 반짝임: 녹음/읽기 중입니다.)
- 플러그 앤 플레이, 드라이버 필요 없음.
하드웨어 및 치수:
- 치수: 117.5mm x 40mm x 13.5mm
- 업스트림: USB-C 암
- 다운스트림: PCIe NVMe M.2 SSD 또는 SATA6Gbps AHCI M.2 SSD(42mm/60mm/80mm, M 키 및 B+M 키)
- 색상: 블랙
- 재질: 알루미늄 하우징
1 x SolidForce NVMe/SATA Enclosure Lite
1 x USB-C to C 데이터 케이블
1 x USB-C to A 데이터 케이블
1 x 사용자 설명서
1 x 알루미늄 열교환기
1 x 실리콘 열 패드
Shipping cost will be calculated during checkout. International duties & taxes may apply and are not calculated at checkout.
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).
Initialize a drive
Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.
Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.
Navigate to Disk Management.
When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.
Create a partition in a drive
Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.
Right-click Unallocated or RAW volume, and select New Simple Volume.
In the New Partition Wizard, click Next.
Select Primary partition.
Leave the partition size set to default, and click Next.
Assign a drive letter or leave it set to the default, and click Next.
Enter the following settings to format the partition:
In the File System field, enter NTFS.
Set the Allocation unit size to Default.
In the Volume label field, enter <your name/reference>.
Select the Perform a quick format check box.
Clear the Enable file and folder compression check box.
Click Next > Finish.
The new drive should appear in Windows Explorer.
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).
Initialize a drive
Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.
Create a partition on a drive
Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.
To create a partition on a new drive, complete the following:
Navigate to Applications and click Utilities.
Open Disk Utility.
Select the new drive and click the Partition tab.
Click Options and verify that it is set to GUID Partition Table.
Enter a name for the partition.
The drive should now be accessible in Finder.
The drive may be damaged. Test with a known-working drive, or test the drive directly to a PC.
The operating system on the computer may not support reading and writing to the file system on the docked hard drive or SSD. Remember, Windows cannot read Mac or Linux file systems. Also, macOS can read but not write to NTFS drives.
If the drives came from a RAID (Redundant Array of Independent Disks), they would not be accessible in our docking stations.
If the drive uses 4Kn sectors, check the technical specifications of the docking station, and ensure it can read 4Kn drives.
You do not need to format your target hard drive before you begin to duplicate it, because the target hard drive is automatically overwritten during the duplication process.