Cat 6 STP RJ45 이더넷 확장 케이블
Cat 6 STP RJ45 이더넷 확장 케이블
Cat 6 STP RJ45 이더넷 확장 케이블
Cat 6 STP RJ45 이더넷 확장 케이블
Cat 6 STP RJ45 이더넷 확장 케이블
Cat 6 STP RJ45 이더넷 확장 케이블
Cat 6 STP RJ45 이더넷 확장 케이블

Cat 6 STP RJ45 이더넷 확장 케이블

Sale price$7.49 USD
SKU: C1896BK-0.5M
길이:0.5M
제품 개요:
  • 기가비트 이더넷
  • 250MHz 고속 대역폭
  • 26AWG 컨덕터
  • 금도금 접점
이 연장 케이블은 이더넷 포트 보호기 역할을 하여 원래 포트의 연결 및 분리를 줄이거나 원래 장치에서 거리를 두고 포트를 만듭니다. 카테고리 6 표준을 사용하는 이 케이블은 1기가비트 이더넷을 전송할 수 있으며 빠르고 안정적인 신호를 제공합니다.

제품 특징:
  • 이더넷 포트 세이버로 기능하여 원래 포트의 연결 및 분리를 줄이거나 원래 장치에서 거리를 두고 포트를 생성하는 솔루션입니다.
  • Cat 6 표준은 250MHz 대역폭에서 초당 최대 1기가비트 데이터를 전송할 수 있으며 빠르고 안정적인 신호 연결을 제공합니다.
  • STP(Shielded Twisted Pair 구조)는 전자기 및 무선 주파수 간섭을 더욱 줄이기 위해 금속 실드가 있는 외부 재킷으로 둘러싸여 있음을 나타냅니다.
  • 금도금 접점 RJ45 커넥터와 베어 구리 전도체로 제작되었습니다.
  • 컴퓨터, 노트북, 프린터, 모뎀, 라우터에 적용됩니다.
하드웨어 및 치수:
재질:
  • 금도금 접점 RJ45(8P8C) 커넥터
  • 베어 구리 도체
  • PVC 재킷
색상: 검정
업스트림: RJ45(8P8C) 플러그(수)
다운스트림: RJ45(8P8C) 잭(암)
케이블 외경: 6mm

패키지 내용물:
1 x Cat 6 STP RJ45 이더넷 확장 케이블

포장: UNITEK 폴리 백
Quantity:

Shipping cost will be calculated during checkout. International duties & taxes may apply and are not calculated at checkout.

Shipping & Delivery

For shipping quotes, "Checkout" the item you want to buy, enter your shipping details and the shipping rates will automatically generate based on the item's weight and the delivery location.
If the shipping rates do not generate,  please contact us.

Normal Shipping Times: 3-14 business days
The final shipping days are according to your local because of COVID-19 guidelines.

Delays:
Unitek is not responsible for delays in shipping caused by extraneous factors (such as incorrect addresses, weather, inspections, labor disputes, and/or transportation problems). We cannot be responsible for lost or damaged packages. 

Duties & Taxes:
Orders shipped outside of the United States may be subject to import taxes, customs duties, fees, and/or VAT (Value Added Taxes) levied by the destination country. You are responsible for paying any taxes, duties, customs fees, and/or VAT charged by your government, as UNITEK has no control over these charges and cannot predict what they may be. Please contact the local customs office in the relevant jurisdiction for additional information on customs policies or duties. International orders will not be refunded for failure to pay import duties, taxes or fees.

For any other questions or inquiries, please contact us.
How can I check the IP address of my router?

Windows
The easiest way of determining the IP address of your router in Windows is to use the “ipconfig /all” command. The output of this command will display an IP address for “Default Gateway” - this is your router. To use this command, complete the following:
Go to the Windows Desktop screen.
Press the Windows key + R.
Type cmd in the text field and press Enter.
Type ipconfig /all.
Mac OS
The easiest way of determining the IP address of your router in Mac OS is to check Network settings. To find the IP address for your router, complete the following:
Click on Apple menu.
Click on System Preferences.
Click on Network.
Highlight the network being used, and click Advanced.
Click the TCP/IP tab near the top of the window.
Your router's IP address is listed beside Router.

How do I change my IP address in Windows or Mac OS?

Go through the following:
Windows 10 
1. Press the Windows Key plus X.
2. Click Network Connections.
3. Right-click the connection that you want to change and click Properties.
Note: The IP address for a wired connection is called Local Area Connection or Ethernet. The IP address for a wireless connection is called Wireless Network Connection or Wireless.
4. Left-click Internet Protocol Version (TCP/IPv4) and click Properties.
5. Select the Use the following IP address option.
6. Enter your desired IP address and click in the Subnet Mask area, which should auto-complete.
7. Click OK twice to apply the settings.
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 7, select Obtain an IP address automatically to access the Internet again.
Windows 8
1. Press the Windows Key plus X.
2. Click Control Panel.
3. Click Network and Sharing Center.
4. Click Change adapter settings on the left.
5. Right-click the connection you want to change and choose Properties.  
Note: If you are changing the IP address on a physical connection, it will be called “Local Area Connection” or “Ethernet”.  If you are changing the IP address on a wireless connection, it will be called “Wireless Network Connection” or “Wireless”.
6. Left-click “Internet Protocol Version (TCP/IPv4)” to select, then click Properties.
7. Select the radio button "Use the following IP address".
8. Enter your desired IP address and click into the Subnet Mask area, which should auto-fill appropriately.
9. Click OK twice to apply the settings.   
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 7, select Obtain an IP address automatically to access the Internet again.
Windows 7
1. Click Start, then select Control Panel.
2. Click Network and Internet.
3. Click Network and Sharing Center.
4. Click Change adapter settings on the left.
5. Right-click the connection you want to change and choose Properties.  
Note: If you are changing the IP address on a physical connection, it will be called “Local Area Connection”.  If you are changing the IP address on a wireless connection, it will be called “Wireless Network Connection”.
6. Left-click “Internet Protocol Version 4 (TCP/IPv4)” to select it, then click Properties.
7. Select the radio button "Use the following IP address".
8. Enter your desired IP address and click into the Subnet Mask area, which should auto-fill appropriately.
9. Click OK twice to apply the settings. 
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 7, select Obtain an IP address automatically to access the Internet again.
Windows Vista
1. Click Start, then select Control Panel.
2. Click Network and Sharing Center.
3. Click Manage network connections on the left.
4. Right-click the connection you want to change and choose Properties.  
Note: If you are changing the IP address on a physical connection, it will be called “Local Area Connection”.  If you are changing the IP address on a wireless connection, it will be called “Wireless Network Connection”.
5. Left-click “Internet Protocol Version (TCP/IPv4)” to select it, then click Properties.
6. Select the radio button "Use the following IP address".
7. Enter your desired IP address and click into the Subnet Mask area, which should auto-fill appropriately.
8. Click OK twice to apply the settings. 
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 6, select Obtain an IP address automatically to access the Internet again.
Windows XP
1. Click Start, then select Control Panel.
2. Click Network Connections.
3. Right-click the connection you want to change and choose Properties.  
Note: If you are changing the IP address on a physical connection, it will be called “Local Area Connection”.  If you are changing the IP address on a wireless connection, it will be called “Wireless Network Connection”.
4. In the middle of the Properties window, scroll down to "Internet Protocol (TCP/IP)" and left-click on it to select it, then click Properties.
5. Select the radio button "Use the following IP address".
6. Enter your desired IP address and click into the Subnet Mask area, which should auto-fill appropriately.
7. Click OK twice to apply the settings. 
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 5, select Obtain an IP address automatically to access the Internet again.
Mac OS
1. Click the Apple menu.
2. Click System Preferences.
3. Click Network.
4. Select the network device that you would like to configure.
Note: The IP address for a wired connection is called Local Area Connection or Ethernet. The IP address for a wireless connection is called Wireless Network Connection or Wi-Fi.
5. Click Advanced.
6. Click TCP/IP.
7. Beside Configure IPv4, select Manually.
8. In the IPv4 Address field, enter your desired IP address.
9. In the Subnet Mask field, enter a default subnet address (for example, 255.255.255.0 for 192.168.xxx.xxx). 
10. Do one of the following:
.Leave the Router field blank.
.Enter the IP address of the default gateway.
11. Click OK and Apply to apply the changes.
Note: If you are changing your IP address to access a specific device, minimize the Network window. Please be reminded, in step 7, select Using DHCP to access the Internet again.

You may also like

Steam Deck용 Cooling Dock ProSteam Deck용 Cooling Dock Pro
Steam Deck용 Cooling Dock Pro
Sale price$119.00 USD
8K HDMI 2.1 Ultra Speed Cable8K 초고속 HDMI 케이블(PS5 4K @120Hz 지원)
Ultrapro DisplayPort 1.4 Active Optical Cable8K Fiber Optic DisplayPort 1.4 Cable (8K @60Hz, 4K @144Hz, 1440p @240Hz)
Full-Featured USB-C 100W PD Fast Charging Cable with 4K@60Hz and 5Gbps (USB 3.0)Full-Featured USB-C 100W PD Fast Charging Cable with 4K@60Hz and 5Gbps (USB 3.0)