Ultrapro DisplayPort 1.4 Active Optical Cable

8K Fiber Optic DisplayPort 1.4 Cable (8K @60Hz, 4K @144Hz, 1440p @240Hz)

8K 광섬유 DisplayPort 1.4 케이블(8K @60Hz, 4K 144Hz, 1440p @240Hz)

8K 광섬유 DisplayPort 1.4 케이블(8K @60Hz, 4K 144Hz, 1440p @240Hz)

Name: 8K 광섬유 DisplayPort 1.4 케이블(8K @60Hz, 4K 144Hz, 1440p @240Hz)
Brand: UNITEK
SKU: C1615GY
Price: 69.99 USD
Availability: InStock

$69.99 USD

SKU: C1615GY

길이:5M

Variant

제품 개요:

타의 추종을 불허하는 8K 60Hz 해상도
몰입형 엔터테인먼트에 이상적인 최대 240Hz
무손실 전송을 위한 광학/전기 솔루션
32.4Gbps 대역폭
안정적인 래치, 아연 합금 하우징 및 금도금 커넥터

UNITEK DP 1.4 활성 광케이블은 모든 프레임에 최대 8K의 비할 데 없는 비주얼과 최대 240Hz 재생률을 제공하여 몰입형 엔터테인먼트 및 게임 경험을 즐길 수 있는 사양을 갖추고 있습니다. 광학 솔루션은 질량 신호가 장거리에서도 무손실 방식으로 전송되도록 합니다.

제품 특징:

32.4Gbps 대용량 대역폭의 DisplayPort(DP) 1.4 사양. 이전 버전과 호환됩니다.
원거리에서도 최대 8K@60Hz의 비할 데 없는 영상 및 3D 디스플레이 신호를 무손실 방식으로 전송하도록 설계되었습니다.
4K 미만일 때 120Hz에서 새로 고침 빈도, 초고속 모션 UHD 이미지가 선명하고 면도날처럼 선명하고 더 낮은 해상도를 사용할 때 더 높은 새로 고침 빈도.
하이 다이내믹 레인지(HDR)를 사용하면 대비, 깊이, 밝기 및 더 넓은 색 영역이 이상적인 값으로 표시됩니다.
DSC(Display Stream Compression) 버전 1.2를 사용하면 압축률을 최대 3:1로 높여 향상된 해상도와 색상 심도를 부드럽고 손실 없이 짧은 대기 시간으로 전송할 수 있습니다.
DSC 1.2 전송을 오버레이하는 FEC(Forward Error Correction)를 통해 압축된 비디오를 외부 디스플레이로 전송하는 데 필요한 전송 오류 복원력을 해결합니다.
DP1.4는 32개 오디오 채널, 1536kHz 샘플 속도 등과 같은 오디오 전송 기능을 확장합니다.
강력한 아연 합금 하우징과 내부식성 금도금 커넥터로 제작되었습니다.
사려 깊고 안정적인 래치 커넥터.
주변 전자파 간섭에 대한 높은 내성. 무방사선 환경으로 모두에게 안전합니다.

하드웨어 및 치수:
재질: 아연 합금 하우징 및 금도금 커넥터
색상: 스페이스 그레이
업스트림: DisplayPort Male
다운스트림: DisplayPort MaleChip: 광/전기 변환 칩
케이블 길이: 5M/ 10M/ 15M/ 20M/ 30M
케이블 외경: 4.8mm

패키지 내용물:
8K 광섬유 DisplayPort 1.4 케이블 1개
사용자 설명서 1개

Quantity:

Shipping cost will be calculated during checkout. International duties & taxes may apply and are not calculated at checkout.

For shipping quotes, "Checkout" the item you want to buy, enter your shipping details and the shipping rates will automatically generate based on the item's weight and the delivery location.
If the shipping rates do not generate,  please contact us.

Normal Shipping Times: 3-14 business days
The final shipping days depend on local logistics and transportation times.

Delays:
Unitek is not responsible for delays in shipping caused by extraneous factors (such as incorrect addresses, weather, inspections, labor disputes, and/or transportation problems). We cannot be responsible for lost or damaged packages. 

Duties & Taxes:
When customs clearance is required for cross-border shipments, any import taxes, customs duties, fees, or VAT (Value Added Tax) imposed by the receiving area are the responsibility of the recipient.

These charges are beyond Unitek's control, and we cannot predict their amount. You are responsible for paying any such additional costs and for complying with the laws and regulations applicable to your country of residence.

If you refuse to pay the applicable charges upon arrival, the goods may be returned to us at your expense.
In such cases, you will receive a refund for the product value paid, minus return shipping costs. Initial shipping fees are non-refundable. If return shipping costs exceed the product value, no refund or return will be processed. For more information, please contact your local customs office.

Global Shipping Notes:
China and Taiwan: Customers in China are required to email a copy of their Resident ID or passport after order confirmation
Korea: Please use your Korean name (not in English) and include your Personal Customs Code.
South Africa: Provide your ID number.
Brazil: Provide your CPF tax number.
Chile: Provide your RUT number.
Turkey: Provide your Turkish ID number.

For any other questions or inquiries, please contact us.

There is no video signal transmission. What should I do?

There are some quick checks if you are trying to troubleshoot issues with a video cable.
You may test the connected devices to make sure that the following components are working correctly and are not the source of the issue:
·      Video cable
·      Video source
·      Video destination
Try the following methods to test your video setup components:
·      Use the video cable, video source, and another video destination (display) to setup to see if the problem is with the components.
·      Use a different video cable, video source, and the original video destination in your setup to see if the problem persists.
Ideally, you should test a component that you know works in another setup. Otherwise, the issue might happen because of the port function of your video source, or a driver issue.
When you test the video setup components, it is recommended that you do the following:
·      Investigate that the source resolution matches the capabilities of the video destination. For example, if the video destination is only capable of 720p, then the video source cannot output 1080p, as that exceeds the capabilities of the video destination.
·      Test at a lower resolution, for example, 1024 x 768.
·      If you are using 4K resolutions, test with a shorter cable and test each of them individually.
If you are experiencing issues with audio over HDMI/DisplayPort, investigate the following:
·      The output audio over HDMI/DisplayPort setting on the source.
·      The compatible audio format on the destination and the source file format on the source.
·      The destination's volume was raised.
·      Take out the 3.5mm device if it is connecting to the hub.
·      Note: HDMI/DisplayPort to DVI/VGA cables, adapters and converters do not support audio.

Why my mouse does not move properly between the displays?

We suggest you to rearrange the monitors in Windows to match the physical location of them on your desk.
Go through the following:
Windows 10 / 8
1. Press the Windows Key plus X and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match the physical location of monitors.
6. Click OK to apply the changes and close the window.
Windows 7 / Vista
1. Click the Start button and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match your physical setup.
6. Click OK to apply the changes and close the window.
Windows XP
1. Click the Start button and select Control Panel.
2. Double-click Display.
3. Click the Settings tab, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match your physical setup.
6. Click OK to apply the changes and close the window.

How do I set to mirror my primary display onto my secondary display in Windows?

Go through the following:
Windows 10 / 8
1. Press the Windows Key plus X and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column.
4. Expand the drop-down menu next to “Multiple displays” and select Duplicate these Displays.
5. Click OK to apply the changes and close the window.
Windows 7 / Vista
1. Click the Start button and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column.
4. Expand the drop-down menu next to “Multiple displays” and select Duplicate these Displays.
5. Click OK to apply the changes and close the window.
Windows XP
1. Click the Start button and select Control Panel.
2. Double-click Display.
3. Click the Settings tab.
4. Un-check the box beside Extend my Windows desktop onto this monitor.
5. Click OK to apply the changes and close the window.