Ultrapro HDMI 2.0 Active Optical Cable
Ultrapro HDMI 2.0 Active Optical Cable
4K 60Hz 光ファイバー HDMI ケーブル
4K 60Hz 光ファイバー HDMI ケーブル
4K 60Hz 光ファイバー HDMI ケーブル
4K 60Hz 光ファイバー HDMI ケーブル
Ultrapro HDMI 2.0 Active Optical Cable

4K 60Hz 光ファイバー HDMI ケーブル

セール価格$43.99 USD
SKU: Y-C1028BK
長さ:10M
製品の特徴:
  • 長距離でも 4K@60Hz Ultra HD ディスプレイ信号を無損失で伝送するための設計。
  • 従来の銅ケーブルと比較して、パフォーマンスが 60% 向上します。
  • HDMI 2.0a および HDMI 2.0b で規定されているように、VR および 3D ディスプレイをサポートします。
  • Dolby True HD や DTS-HD などのロスレス HDMI オーディオ フォーマットをサポートします。
  • ARC、HEC、CECに対応。
  • EDIDを含むサポート。自己検出機能。
  • 周囲の電磁干渉に対する高い耐性。
ハードウェア & 寸法:
  • ケーブル長: 10M/15M/20M/30M/40M/50M/60M/70M
  • 色: 黒
パッケージ内容:
1×4K 60Hz光ファイバーHDMIケーブル
数量:

送料はチェックアウト時に計算されます。国際関税と税金が適用される場合があり、チェックアウト時に計算されません。

出荷と配達

配送料の見積もりについては、購入したい商品を「チェックアウト」し、配送の詳細を入力すると、配送料が商品の重量と配送場所に基づいて自動的に生成されます。
配送料が発生しない場合は、お問い合わせください。

通常の配送時間: 3 ~ 14 営業日
COVID-19 ガイドラインのため、最終発送日はお住まいの地域によって異なります。

遅延:
Unitek は、無関係な要因 (住所の誤り、天候、検査、労働争議、および/または輸送上の問題など) に起因する配送の遅延について責任を負いません。荷物の紛失や破損については責任を負いかねます。

関税および税金:
米国外に発送される注文には、仕向国によって課される輸入税、関税、手数料、および/または VAT (付加価値税) が課される場合があります。 UNITEKはこれらの料金を管理しておらず、それらが何であるかを予測できないため、政府から請求される税金、関税、通関手数料、および/またはVATを支払う責任はお客様にあります。税関のポリシーや関税に関する追加情報については、該当する管轄区域の現地の税関にお問い合わせください。海外からの注文は、輸入関税、税金、手数料の支払いを怠った場合、返金されません。

その他ご不明な点やお問い合わせは までお問い合わせください
There is no video signal transmission. What should I do?

There are some quick checks if you are trying to troubleshoot issues with a video cable.
You may test the connected devices to make sure that the following components are working correctly and are not the source of the issue:
·      Video cable
·      Video source
·      Video destination
Try the following methods to test your video setup components:
·      Use the video cable, video source, and another video destination (display) to setup to see if the problem is with the components.
·      Use a different video cable, video source, and the original video destination in your setup to see if the problem persists. 
Ideally, you should test a component that you know works in another setup. Otherwise, the issue might happen because of the port function of your video source, or a driver issue.
When you test the video setup components, it is recommended that you do the following:
·      Investigate that the source resolution matches the capabilities of the video destination. For example, if the video destination is only capable of 720p, then the video source cannot output 1080p, as that exceeds the capabilities of the video destination.
·      Test at a lower resolution, for example, 1024 x 768.
·      If you are using 4K resolutions, test with a shorter cable and test each of them individually.
If you are experiencing issues with audio over HDMI/DisplayPort, investigate the following:
·      The output audio over HDMI/DisplayPort setting on the source.
·      The compatible audio format on the destination and the source file format on the source.
·      The destination's volume was raised.
·      Take out the 3.5mm device if it is connecting to the hub.
·      Note: HDMI/DisplayPort to DVI/VGA cables, adapters and converters do not support audio.

Why my mouse does not move properly between the displays?

We suggest you to rearrange the monitors in Windows to match the physical location of them on your desk. 
Go through the following:
Windows 10 / 8
1. Press the Windows Key plus X and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match the physical location of monitors.
6. Click OK to apply the changes and close the window.
Windows 7 / Vista
1. Click the Start button and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match your physical setup.
6. Click OK to apply the changes and close the window.
Windows XP
1. Click the Start button and select Control Panel.
2. Double-click Display.
3. Click the Settings tab, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match your physical setup.
6. Click OK to apply the changes and close the window.

How do I set to mirror my primary display onto my secondary display in Windows?

Go through the following:
Windows 10 / 8
1. Press the Windows Key plus X and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column.
4. Expand the drop-down menu next to “Multiple displays” and select Duplicate these Displays.
5. Click OK to apply the changes and close the window.
Windows 7 / Vista
1. Click the Start button and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column.
4. Expand the drop-down menu next to “Multiple displays” and select Duplicate these Displays.
5. Click OK to apply the changes and close the window.
Windows XP
1. Click the Start button and select Control Panel.
2. Double-click Display.
3. Click the Settings tab.
4. Un-check the box beside Extend my Windows desktop onto this monitor.
5. Click OK to apply the changes and close the window.