Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
  • Load image into Gallery viewer, Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
  • Load image into Gallery viewer, Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
  • Load image into Gallery viewer, Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
  • Load image into Gallery viewer, Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
  • Load image into Gallery viewer, Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
  • Load image into Gallery viewer, Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
  • Load image into Gallery viewer, Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable
  • Load image into Gallery viewer, Cat 6 UTP RJ45 (8P8C) Flat Ethernet Cable

Cat 6 UTP RJ45 Flat Ethernet Cable over 10M

Regular price
$0.00 USD
Sale price
$0.00 USD
Regular price
Unit price
per 
Where to Buy

Model: C1809GBK / C1810GBK/ C1811GBK/ C1812GBK/ C1813GBK/ C1814GBK/ C1815GBK

Cable Length: 1M/ 2M/ 3M/ 5M/ 10M/ 15M/ 20M

Product Overview:
  • Certificated by Fluke Networks
  • 250MHz Mass-capacity Bandwidth
  • Gigabit Ethernet
  • Gold-plated Contacts
This LAN cable comes with only 1.8mm height, is excellent for interior decoration which aims for indiscernible and harmonious installation. With Category 6 standard, this cable allows sending 1 Gigabit Ethernet, provides you a speedy and reliable signal.

Product Features:
  • Cat 6 standard allows sending up to 1 Gigabit data per second under the 250MHz bandwidth, provides speedy and stable signal connection.
  • UTP (Unshielded Twisted Pairs structure) refers to be surrounded by an outer jacket without a metallic shield. This helps the cable to be small in diameter.
  • Made with gold-plated contacts RJ45 connector and bare copper conductor.
  • Applicable to computers, laptops, printers, modem, router.

Hardware & Dimension:
Material:
  • Gold-plated Contacts RJ45 (8P8C) Connectors
  • Bare Copper Conductor
  • PVC Jacket
Color: Black
Upstream: RJ45 (8P8C)
Downstream: RJ45 (8P8C)
Cable OD: 6mm x 1.8mm

Package Content:
1 x Cat 6 UTP RJ45 Flat Ethernet Cable

Packaging: UNITEK Poly Bag

F.A.Q

How can I check the IP address of my router?

Windows
The easiest way of determining the IP address of your router in Windows is to use the “ipconfig /all” command. The output of this command will display an IP address for “Default Gateway” - this is your router. To use this command, complete the following:
Go to the Windows Desktop screen.
Press the Windows key + R.
Type cmd in the text field and press Enter.
Type ipconfig /all.
Mac OS
The easiest way of determining the IP address of your router in Mac OS is to check Network settings. To find the IP address for your router, complete the following:
Click on Apple menu.
Click on System Preferences.
Click on Network.
Highlight the network being used, and click Advanced.
Click the TCP/IP tab near the top of the window.
Your router's IP address is listed beside Router.

How do I change my IP address in Windows or Mac OS?

Go through the following:
Windows 10 
1. Press the Windows Key plus X.
2. Click Network Connections.
3. Right-click the connection that you want to change and click Properties.
Note: The IP address for a wired connection is called Local Area Connection or Ethernet. The IP address for a wireless connection is called Wireless Network Connection or Wireless.
4. Left-click Internet Protocol Version (TCP/IPv4) and click Properties.
5. Select the Use the following IP address option.
6. Enter your desired IP address and click in the Subnet Mask area, which should auto-complete.
7. Click OK twice to apply the settings.
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 7, select Obtain an IP address automatically to access the Internet again.
Windows 8
1. Press the Windows Key plus X.
2. Click Control Panel.
3. Click Network and Sharing Center.
4. Click Change adapter settings on the left.
5. Right-click the connection you want to change and choose Properties.  
Note: If you are changing the IP address on a physical connection, it will be called “Local Area Connection” or “Ethernet”.  If you are changing the IP address on a wireless connection, it will be called “Wireless Network Connection” or “Wireless”.
6. Left-click “Internet Protocol Version (TCP/IPv4)” to select, then click Properties.
7. Select the radio button "Use the following IP address".
8. Enter your desired IP address and click into the Subnet Mask area, which should auto-fill appropriately.
9. Click OK twice to apply the settings.   
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 7, select Obtain an IP address automatically to access the Internet again.
Windows 7
1. Click Start, then select Control Panel.
2. Click Network and Internet.
3. Click Network and Sharing Center.
4. Click Change adapter settings on the left.
5. Right-click the connection you want to change and choose Properties.  
Note: If you are changing the IP address on a physical connection, it will be called “Local Area Connection”.  If you are changing the IP address on a wireless connection, it will be called “Wireless Network Connection”.
6. Left-click “Internet Protocol Version 4 (TCP/IPv4)” to select it, then click Properties.
7. Select the radio button "Use the following IP address".
8. Enter your desired IP address and click into the Subnet Mask area, which should auto-fill appropriately.
9. Click OK twice to apply the settings. 
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 7, select Obtain an IP address automatically to access the Internet again.
Windows Vista
1. Click Start, then select Control Panel.
2. Click Network and Sharing Center.
3. Click Manage network connections on the left.
4. Right-click the connection you want to change and choose Properties.  
Note: If you are changing the IP address on a physical connection, it will be called “Local Area Connection”.  If you are changing the IP address on a wireless connection, it will be called “Wireless Network Connection”.
5. Left-click “Internet Protocol Version (TCP/IPv4)” to select it, then click Properties.
6. Select the radio button "Use the following IP address".
7. Enter your desired IP address and click into the Subnet Mask area, which should auto-fill appropriately.
8. Click OK twice to apply the settings. 
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 6, select Obtain an IP address automatically to access the Internet again.
Windows XP
1. Click Start, then select Control Panel.
2. Click Network Connections.
3. Right-click the connection you want to change and choose Properties.  
Note: If you are changing the IP address on a physical connection, it will be called “Local Area Connection”.  If you are changing the IP address on a wireless connection, it will be called “Wireless Network Connection”.
4. In the middle of the Properties window, scroll down to "Internet Protocol (TCP/IP)" and left-click on it to select it, then click Properties.
5. Select the radio button "Use the following IP address".
6. Enter your desired IP address and click into the Subnet Mask area, which should auto-fill appropriately.
7. Click OK twice to apply the settings. 
Note: If you are changing your IP address to access a specific device, minimize the Network Connections window. Please be reminded, in step 5, select Obtain an IP address automatically to access the Internet again.
Mac OS
1. Click the Apple menu.
2. Click System Preferences.
3. Click Network.
4. Select the network device that you would like to configure.
Note: The IP address for a wired connection is called Local Area Connection or Ethernet. The IP address for a wireless connection is called Wireless Network Connection or Wi-Fi.
5. Click Advanced.
6. Click TCP/IP.
7. Beside Configure IPv4, select Manually.
8. In the IPv4 Address field, enter your desired IP address.
9. In the Subnet Mask field, enter a default subnet address (for example, 255.255.255.0 for 192.168.xxx.xxx). 
10. Do one of the following:
.Leave the Router field blank.
.Enter the IP address of the default gateway.
11. Click OK and Apply to apply the changes.
Note: If you are changing your IP address to access a specific device, minimize the Network window. Please be reminded, in step 7, select Using DHCP to access the Internet again.