PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ
PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ

PS5用SolidForce PCIe/NVMe M.2 SSD 10Gbpsエンクロージャ

セール価格$42.49 USD 通常価格$49.99 USD
15%節約する
SKU: S1224A
モデル番号: S1224A

製品の概要:
  • PS5 ストレージ拡張用
  • PS4 ゲームをコピーして PS5 で直接プレイする
  • コンソールに取り付けられたデザイン
  • USB 3.2 Gen2 10Gbps データ

この 10Gbps アルミニウム エンクロージャは、PS5 用の外付け M.2 SSD ストレージをサポートしており、PS5 でゲームを起動するためにゲームをダウンロードおよびコピーするために使用できます。コンソールに取り付けられた設計により、しっかりとした接続が提供されます。
Details

Products Features:
•    This SolidForce is an excellent solution for your PlayStation 5/4. Especially PS5 to store the games and files, and which from support PS4 as well.
•    The M.2 SSD using for PS5 should be PCIe Gen4 x4 interface with 250GB – 4TB capacity.
•    Support multi-size PCIe/NVMe M.2 SSD specifications (42mm/60mm/80mm; M Key and M+B Key).
•    Support SSD TRIM instruction and UASP acceleration.
•    With  USB3.2 Gen2 specification over the dual USB-A connectors, data transfer rate up to 10Gbps. Backward compatible with USB3.0/ 2.0/ 1.1.
•    With an 10Gbps-supported extension cable for connecting with PS4 or another laptop/computer. Please be aware to connect the cable and the connector according to the instructions on the user manual.
•    Tool-free design aluminium-alloy surface for quick installation of M.2 SSD and aid heat dissipation.
Note: Not compatible with M.2 SATA drives.
 

Specs
Colour Space Grey
Dimension 120mm x 45mm x 15.5mm
Materials Aluminium-Alloy Housing
Upstream Dual USB-A
Downstream •    PCIe/NVMe M.2 SSD
•    USB-A
Input N/A
Output N/A
Cable Length of Attached Cable 15cm USB-A to USB-A 10Gbps Extension Cable
Packaging Content 1 x SolidForce For PS5
1 x USB-A to USB-A 10Gbps Extension Cable (15cm)
1 x Aluminium Heat Exchanger
1 x Silicone Thermal Pad
1 x Rubber Mount
1 x User Manual

 

User Manual

Download

数量:

送料はチェックアウト時に計算されます。国際関税と税金が適用される場合があり、チェックアウト時に計算されません。

出荷と配達

配送料の見積もりについては、購入したい商品を「チェックアウト」し、配送の詳細を入力すると、配送料が商品の重量と配送場所に基づいて自動的に生成されます。
配送料が発生しない場合は、お問い合わせください。

通常の配送時間: 3 ~ 14 営業日
COVID-19 ガイドラインのため、最終発送日はお住まいの地域によって異なります。

遅延:
Unitek は、無関係な要因 (住所の誤り、天候、検査、労働争議、および/または輸送上の問題など) に起因する配送の遅延について責任を負いません。荷物の紛失や破損については責任を負いかねます。

関税および税金:
米国外に発送される注文には、仕向国によって課される輸入税、関税、手数料、および/または VAT (付加価値税) が課される場合があります。 UNITEKはこれらの料金を管理しておらず、それらが何であるかを予測できないため、政府から請求される税金、関税、通関手数料、および/またはVATを支払う責任はお客様にあります。税関のポリシーや関税に関する追加情報については、該当する管轄区域の現地の税関にお問い合わせください。海外からの注文は、輸入関税、税金、手数料の支払いを怠った場合、返金されません。

その他ご不明な点やお問い合わせは までお問い合わせください
PS5-Mounted M.2 SSD Enclosure

M.2 SSD storage can be used to download and copy games for launching them on PS5, as well as media apps. The console-mounted design provides a solid connection, and resolves the clutter of cables.

M.2 SSD Requirements

Please be aware this enclosure DOES NOT support M.2 PCIe AHCI SSD, mSATA SSD.

Connection On Laptops

Not just for gaming consoles but also for laptops. A supported extension cable is provided for connecting to laptops. Perfect for gamers, tech nerds and 4K media designers.

Advanced SuperSpeed

USB3.2 Gen2 10Gbps SuperSpeed meets the high R/W rate of your M.2 SSD for steady and efficient data transfer. Also, this product supports UASP & TRIM for efficiency-boosting.

Protection System Against Overheat

Quality materials make this product reliable.

Thoughtful Tool-Free

No mounting screws for installation.

How do I initialize a brand new hard drive in Windows or Mac OS?

Windows 10 
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, ex-FAT, NTFS, and so on).

Initialize a drive
Note: You typically only need to initialize a drive if the drive is new. If you cannot find an uninitialized drive in Disk Management, skip the following steps and try to partition your device.

Press the Windows key + R, type compmgmt.msc, and click Run to open Computer Management.

Navigate to Disk Management.

When prompted to, initialize your disk(s). If you are running Windows® 7 or later and are using a drive larger than 2TB, initialize the disk(s) with GPT. If you are running an earlier version of Windows, initialize the disk(s) with MBR. For more information, visit the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#mbr-vs-gpt.

Click OK.

Create a partition in a drive
Note: The following steps create an NTFS partition that uses the entire drive space. To use a different file system, select a different option in step 6.

Right-click Unallocated or RAW volume, and select New Simple Volume.

In the New Partition Wizard, click Next.

Select Primary partition.

Leave the partition size set to default, and click Next.

Assign a drive letter or leave it set to the default, and click Next.

Enter the following settings to format the partition:

In the File System field, enter NTFS.
Set the Allocation unit size to Default.
In the Volume label field, enter <your name/reference>.
Select the Perform a quick format check box.
Clear the Enable file and folder compression check box.
Click Next > Finish.
The new drive should appear in Windows Explorer.

Mac OS
Before you can access a new or formatted drive in your operating system, you need to initialize it first and then create a partition on the drive. A partition defines an area of the drive to use for storing data. The partition uses a file system (for example, HFS+, ex-FAT, NTFS, and so on).

Initialize a drive
Mac OSX detects a drive that needs to be initialized and automatically prompts you to initialize the drive. If you are prompted to initialize the drive, click Initialize. If you are not prompted to initialize the drive and you cannot find the drive in Finder, you will need to create a partition on the drive.

Create a partition on a drive
Note: The following steps create an HFS+ (Mac OS Extended (Journaled)) partition that uses the entire drive space.

To create a partition on a new drive, complete the following:

Open Finder.

Navigate to Applications and click Utilities.

Open Disk Utility.

Select the new drive and click the Partition tab.

Click Options and verify that it is set to GUID Partition Table.

Enter a name for the partition.

Click Partition.

The drive should now be accessible in Finder.

The data on my drive is not accessible. How do I fix this?

The drive may be damaged. Test with a known-working drive, or test the drive directly to a PC.
The operating system on the computer may not support reading and writing to the file system on the docked hard drive or SSD.  Remember, Windows cannot read Mac or Linux file systems. Also, macOS can read but not write to NTFS drives.
If the drives came from a RAID (Redundant Array of Independent Disks), they would not be accessible in our docking stations.
If the drive uses 4Kn sectors, check the technical specifications of the docking station, and ensure it can read 4Kn drives.

Do I need to format my target hard drive before I begin to duplicate it?

You do not need to format your target hard drive before you begin to duplicate it, because the target hard drive is automatically overwritten during the duplication process.